Volkswagen Key Programming Tips
Volkswagen offers a simple method to replace the key that is no longer working or to add an additional. With just a few easy tips, the process is simple and inexpensive.
First, find the right key fob. It should either come with the keyblade which can be flipped out or be internal to the keyfob. Get all the documentation you need to prove ownership. Then, visit the locksmith or dealer.
Immobilizer
The immobilizer function is an anti-theft feature that stops keys that are damaged or not authorized from getting into the vehicle. The system operates by recognizing a particular chip in every key. A VW dealer or locksmith for automobiles can program additional keys, but the process requires specific tools and software. The right tools are necessary for a smooth process. Before starting the key programming process technicians must replicate the issue to pinpoint the issue. They should also look over the vehicle for fault codes, check for technical service bulletins (TSBs) and test the battery within the key fob.
Volkswagen keys that have unprogrammed immobilizer chips can shut down the engine after a couple of minutes of cranking. The immobilizer chip does not prevent the alarm from turning on or allowing doors to be opened. The immobilizer on the key fob is a separate part that is glued to the metal flip side of the car keys. It needs to be programmed into the vehicle's computer to work.
The process of adding a new key to an VW is more expensive than making duplicate keys in the event that the original keys are lost. The key has to be purchased from the manufacturer, then it is subject to an specialized programing process in order to sync up with the computer system in the vehicle. This can be accomplished by a professional using a program like VagTacho and VCDS. This procedure is recommended for cars with the older Immobilizer 2.
Electronic Ignition
The electronic ignition feature of the key is a vital element of the anti-theft technology in the vehicle. The feature is activated when the key fob is inserted in the ignition. It's not a 100% secure system, however. It is susceptible to failures, which may result in your VW engine not starting. This can happen due to a number of reasons, such as faulty key programming or a defective car battery.
Luckily, you can avoid this problem by getting your Volkswagen car key fobs programmed professionally. This can be done through a dealer, or a locksmith. The cost of this service varies however the most common prices range from $90 to $150. Moreover, these prices depend on the year and model of the vehicle.
You'll need your main key to program the new VW key fob. The new key must be able to start the engine of the vehicle. This will allow the onboard diagnostics to recognize it as a legitimate key. The immobilizer warning light will dim.
Certain models require a PIN code of three to four digits, to enable onboard key programming. Certain models may require a scanning tool. Locksmiths or dealers can use a scanner for programming keys onboard. These tools aren't for sale at general car accessory stores, and you will need to either purchase one or borrow it from an auto dealer.
Keyless Entry
If you have lost your Volkswagen key fob or has a battery issue, the car may start but it won't unlock. Fortunately, it's simple to fix this issue. First, check that the key fob is seen by the vehicle. If it is, press the button to lock for six seconds, until the lights flash on the key.
The key fob will now be reset to the closest location to your VW. After that you are able to unlock the vehicle by pressing the unlock button on the fob's key again. If the vehicle doesn't unlock after this procedure, you'll have to contact the dealer to program the key.
The procedure of getting a brand new Volkswagen key programmed could be costly. It is recommended to get estimates from several dealers before choosing the one that is most suitable for you. Be sure to determine if the dealer charges for key programming and for the new key itself.
G28CarKeys is a good idea for many reasons. You may require an extra key in the event of theft or loss of your primary key. Here are some simple steps to follow if you own an extra Volkswagen key and would like to program it to work with your Volkswagen.
Remote Start
As opposed to the previous generation of key fobs that communicated with your vehicle via radio waves, Volkswagen's remote-start systems connect with your car using a secure wireless connection using cellular technology. This means that your VW Atlas, Jetta, or Passat can detect the proximity of your vehicle and can activate features such as keyless entry and push-button start. It's as easy as opening the app connecting your smartphone to your car and pressing the button.
Be certain that your Volkswagen is parked, and that the driver's side door is shut. This will ensure only the correct key is used in order to access your vehicle’s features. If the key is not recognized the dashboard will display an error message. This method is only compatible with the latest VW models equipped with an RFID sensor ring on the steering wheel. These models require a secret pin number to be programmed.
To program an additional key fob, close the driver's door and then remove the key that was used for the original. Press the lock button of the new keyfob. This will signal the vehicle that it is a functioning key. The key will then begin sending signals to enable you to open the driver's door and start your vehicle remotely. Some people report that this only works when there is a clear line of sight to the car, however some are successful even in congested parking lots.